Measurement of macroscopic plasma parameters with a radio experiment: Interpretation of the quasi-thermal noise spectrum observed in the solar wind

The ISEE-3 SBH radio receiver has provided the first systematic observations of the quasi-thermal (plasma waves) noise in the solar wind plasma. The theoretical interpretation of that noise involves the particle distribution function so that electric noise measurements with long antennas provide a fast and independent method of measuring plasma parameters: densities and temperatures of a two component (core and halo) electron distribution function have been obtained in that way. The polarization of that noise is frequency dependent and sensitive to the drift velocity of the electron population. Below the plasma frequency, there is evidence of a weak noise spectrum with spectral index -1 which is not yet accounted for by the theory. The theoretical treatment of the noise associated with the low energy (thermal) proton population shows that the moving electrical antenna radiates in the surrounding plasma by Carenkov emission which becomes predominant at the low frequencies, below about 0.1 F sub P

February 24, 1965 - Salaries of City Employees

This address by Lewiston Mayor Robert Couturier was prepared for broadcast on WGAN television.https://digitalcommons.usm.maine.edu/fac-couturier-addresses/1005/thumbnail.jp

Computer microworld development adapted to children\u27s conceptions : a case study.

This research studied changes in ten middle school students\u27 scientific conceptions during interaction with a computer microworld designed adaptively for exploring phases of the moon. Following direct observations of lunar phenomena, five students participated in the development of the computer microworld. The researcher implemented software design requests from the students based on their real world and microworld experience. Five different students used the final revised microworld and provided additional feedback. All sessions were transcribed and analyzed. Evidence from this case study suggests that this constructionist activity was a good catalyst for inducing conceptual change in learners—especially the five who had considerable ownership in the software development. Implications for classroom teaching strategies and suggestions for future research are offered

Stability of an oscillating tip in Non-Contact Atomic Force Microscopy: theoretical and numerical investigations

This paper is a theoretical and a numerical investigation of the stability of a tip-cantilever system used in Non-Contact Atomic Force Microscopy (NC-AFM) when it oscillates close to a surface. No additional dissipative force is considered. The theoretical approach is based on a variationnal method exploiting a coarse grained operation that gives the temporal dependence of the nonlinear coupled equations of motion in amplitude and phase of the oscillator. Stability criterions for the resonance peak are deduced and predict a stable behavior of the oscillator in the vicinity of the resonance. The numerical approach is based on results obtained with a virtual NC-AFM developped in our group. The effect of the size of the stable domain in phase is investigated. These results are in particularly good agreement with the theoretical predictions. Also they show the influence of the phase shifter in the feedback loop and the way it can affect the damping signal

Influence of noncontact dissipation in the tapping mode: Attempt to extract quantitative information on the surface properties with the local force probe method

In the Tapping mode, a variation of the oscillation amplitude and phase as a function of the tip sample distance is the necessary measurement to access quantitatively to the properties of the surface. In the present work, we give a systematic comparison between experimental data recorded on two surfaces, phase and amplitude, and theoretical curves. With an interaction between the tip and the surface taking into account an attractive and a repulsive term, the analytical approach is unable to properly describe the relationship between the phase variation and the oscillation amplitude variation. When an additional dissipation term is involved, due to the attractive interaction between the tip and the surface, the model gives a good agreement with the recorded data. Particularly, the trends in the phase variations related to the noncontact situations have been found to be amenable to an analysis based upon a simple viscoelastic behavior of the surface

Determination of guidance values for closed landfill gas emissions

International audienceIn order to promote active landfill gas collection and treatment or natural attenuation, it is necessary to identify trigger values concerning landfill gas emissions in the preliminary stage of a risk assessment. The determination of these values is the first goal of a work which includes a large regulation review and the study of a generic inhalation exposure scenario for the most common reuse of French Municipal Solid Waste (MSW) landfill surface, namely a recreational area without residential buildings. The health risk levels of this scenario are lower than the usual levels and enable to determine trigger values for methane production rate. These results and the methane oxidation rate in the landfill cover allow for the determination of residual methane surface emission rates. The combination of these parameters with on-site specific measurements enables the promotion of natural attenuation or active landfill gas treatment

Regeneration of Raney®-Nickel Catalyst for the Synthesis of High-Value Amino-Ester Renewable Monomers

Aiming to synthesize high-value renewable monomers for the preparation of renewable specialty polyamides, we designed a new protocol. Amino-esters, produced via the hydrogenation of unsaturated nitrile-esters, are alternative monomers for the production of these polymers. A high monomer yield can be obtained using a Raney®-nickel catalyst despite the drawback of fast deactivation. The hydrogenation of 10-cyano-9-decenoate (UNE11) was tentatively reactivated by three different regeneration procedures: solvent wash, regeneration under hydrogen, and regeneration under sonication. Among these procedures, the in-pot catalyst regeneration (H2 30 bar, 150 °C) demonstrated complete activity recovery and full recycling